-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
17
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
UFO 3 INSTALLATION (2019.12.23) V1
4.
Insert the extension tube into
the upper screw on fixed angle
mount bracket ,and tighten
with the 2 sets of Extension
tube M10x 70L 3 bolt kit.
(Recommended Tightening
Torque
：
24 N.m(240 Kgf.cm))
5.
Insert the extension tube
clamp into the extension tube,
make sure the chamfer as
picture shows is downward,
and tighten with 6 sets of
extension tube clamp M8x 15L
6 bolt kit.
(Recommended Tightening
Torque: 12 N.m(120 kgf.cm)
6.
Insert the motor tube in the
extension tube clamp, then
take out the earth wire and guy
wire bracket as picture shows
to tighten with motor tube
with 3 sets of M8x 55L 3 bolt
kit.
(Recommended Tightening
Torque
：
12 N.m(120 Kgf.cm))
Upper Screw
Earth Wire
Guy Wire Bracket
