-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
20
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
UFO 3 INSTALLATION (2019.12.23) V1
11-1
To speed up the process,
you can proceed 4 sets of the
beam clamp as picture shows
on the ground, secure the
beam clamp tightly.
11-2
Tailor the guy wire according
to the situation.
Guy Wire Bracket
：
(Recommended Tightening
Torque
：
5 N.m(50 Kgf.cm))
Beam Clamp Set, Guy Wire
Bracket
4
8
12-1
Attach the beam clamps to
the I-beam and securely fasten
to the proper position based
on step 11.
12-2
Pass the safety cable
through the ring and secure
with guy wire bracket.
Beam Clamp Set
：
(Recommended Tightening Torque
：
12 N.m(120 Kgf.cm))
