-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
21
SUNONWEALTH ELECTRIC MACHINE INDUSTRY CO., LTD.
UFO 3 INSTALLATION (2019.12.23) V1
13. Securely tighten the two sides
of turnbuckle with guy wire
bracket and the beam clamp set,
refer to the fasten instruction as
picture shows. Adjust the turn
buckle to make sure the ceiling
fan reach the balance. Repeat
this step to complete 4 sets of
wire rope bolt kit to secure the
turnbuckle.
a. Guy Wire Bracket*8
b. Turnbuckle*4
(Recommended Tightening Torque
：
5 N.m(50 Kgf.cm))
14. Insert the winglet into the
airfoil and tighten with 7 sets of
winglets M6x35L 7 bolt kit as
picture shows.
(Recommended Tightening
Torque
：
5 N.m(50 Kgf.cm)
15. Insert the airfoil into the airfoil
holder and tighten with 21 sets
of airfoil M6x35L 21 bolt kit as
picture shows.
(Recommended Tightening
Torque
：
5 N.m(50 Kgf.cm))
