LIT-212 Sunoptics Surgical
®
Rev. -
(Deutsch)
Datum der Revision:03/24/15
Seite 13 von 50
1. VERWENDUNGSZWECK
Dieses LED 8500-II Kopfleuchtensystem wurde entwickelt, um Operationsstellen mit
hochintensivem LED-Licht zu erhellen.
Wir beglückwünschen Sie zum Kauf Ihres neuen LED-Kopfleuchtensystems!
Das LED Headlight 8500-II ist eine akkubetriebene, tragbare Leuchte mit einstellbarem
Scheinwerfer. Wir verwenden eine verschlüsselte Akkutechnologie, die mit zulässigen
Akkus vom Hersteller oder autorisierten Fachhandel betrieben wird.
Außerdem ist das Gerät mit einem Alarmsystem ausgestattet, das bei geringer
Akkuleistung ein akustisches Signal abgibt. Herabsetzen der Lichtleistung verlängert die
Akkuleistung und damit die Warnzeit bis zum Abschalten des Geräts, je nach Nutzung
und Akkuzustand. Dieser praktische Alarm gibt dem Benutzer Zeit, eine
Reservebeleuchtung für jede Anwendung dieses Systems bereitzustellen. Siehe
allgemeine Warnhinweise.
2. ALLGEMEINE WARNHINWEISE
Hinweis:
Sie müssen den Akku zuerst vollständig aufladen, bevor Sie die
Kopfleuchte das erstemal einsetzen.
Der Benutzer sollte mit der Nutzung und Pflege dieses Produkts vertraut sein.
Er sollte die Anleitung genau durchlesen, bevor die Kopfleuchte klinisch
eingesetzt wird.
Prüfen Sie den Ladezustand des Akkus sorgfältig vor jedem Eingriff
(Leistungsmesser), um optimale Leistungsdauer zu gewährleisten.
LED-Hochleistungslichtquellen verwenden lichtstarke LEDs, die Hitze und Licht
erzeugen. Die starke Leistung dieser LEDs kann verursachen, dass der
Scheinwerfer beim Betrieb heiß wird, was normal ist.
Das Ladegerät und Netzteil dürfen nicht im OP oder in der Nähe des Patienten
verwendet werden.
Scheinen Sie das Licht während der Operation niemals direkt in die Augen, da
dies extremes Unbehagen verursachen kann.
Benutzer sind bei der Verwendung dieses Geräts für die Bereitstellung einer
Reservebeleuchtung verantwortlich.