Under pressure Protection
If the voltage is too high, the temperature will decrease to prevent high temperature
from over heating. A light will flash warning to check the cooktop.
Automatically Shut-Off Function
If no one is available to keep an eye on the cooktop, the cooktop will automatically
shut off in 2 hours.
Overheat Protection
When the cooktop is in use, the heat will decrease automatically when it reaches
446ºF to prevent it from overheating. The light will switch from heat to keep warm.
When the temperature of the cookware decreases, the cooktop will automatically turn
back to heat.
The cooktop will decrease in temperature if it overheats. It will restart again once the
cooktop have lowered its temperature. A light will blink to indicate to check the
cooktop.
_____________________________________________________________________
To Use The Cooktop
To turn on the cooktop, turn on the power and select L/M/H (Low, Medium, High) a
fan will rotate to indicate the cooktop is working.
To turn off the cooktop, turn off by pushing the off button. The fan will go on 30
seconds after turning it off to release off the hot air inside the cooktop.
The function of pushing the Cook/Warm button is “cook” will add heat and the
“warm” will keep the cooktop the temperature it was heated to. The cooking power is
divided into 9 sections, 1 being the least firepower and 9 being the highest firepower.
There are 5 lights indicating the power of the heat; 1 for small, 3 lights for medium,
and 5 lights for high heat.
*It is normal when the keep warm light flashes either with a cookware or without.
_____________________________________________________________________
Maintaining the Product
Unplug the cord before any cleaning is done.
