Installation-Pre-Installation Planning
Pre-Installation Planning
Before you begin to assemble your sun canopy, you should observe the following
pre-installation considerations.
• Your sun canopy operates from a 120V ac source. You should have a
standard NEMA 5-15R electrical outlet (like the type shown below)
installed in the room in which you will use the canopy. The outlet should
be on a dedicated circuit. (If you have questions regarding your outlet,
consult a professional electrician.) The outlet must be earth grounded.
15 AMP NEMA#5-15R RECEPTACLE
• Make sure the room in which you intend to use your sun canopy is
well ventilated. Air from the room is used to cool the sunbed, and a
poorly ventilated room may cause the unit to become hot and cause
discomfort to the user.
• Your sun canopy is designed to operate in an ambient room
temperature of 80°F maximum and 70% relative humidity.
• Place your sun canopy no closer than 6" from any wall. Make sure that
curtains, drapes, and other room furniture do not obstruct the airflow into
the end caps or out of the fan opening areas.
2
