Mounting Manual
INSTALLATION INSTRUCTION FOR SR220-250P SERIES SOLAR MODULE
230W series solar modules are made of 60pcs of 156mm
×
156mm crystalline solar cells in series with high efficiency,
high transmission and low iron toughened glasses , anti-aging EVA and high flame-resistant back sheet to laminate,
and anodized aluminum alloy frame. Products have high efficiency, lifespan easy installation, high wind resistance
etc.
Products are made according to national standard GB/T9535-2005
（
IEC61215-2005
）
and have passed authority test
center’s examination. Our products can be used in home roof solar systems, PV stations, communication stations,
petrol, ocean, meteorological, traffic and solar building etc.
SR220-250P series solar modules mainly include220W
、
225W
、
230W
、
235W
、
240W
、
245W
、
250W
1
、
Electrical Specification POLY-Si series
PHOTOVOLTAIC MODULE
Model
SR220-250P
Number of cells(pcs)
60
Pmpp(W)
230
±
3%
Voc(V)
38.0
±
3%
Isc(A)
8.18
±
3%
Vmpp(V)
30.4
±
3%
Impp(A)
7.57
±
3%
Max series fuse rating(A)
15
±
3%
Nominal Mass
21.5kg
Package Size
1650mm
×
992mm
×
50mm
Cell Size
156mm
×
156mm
MAX
System voltage
DC1000V
Bypass Diode Rating
45V, 12A,6pcs provided
●
The electrical characteristics are within
±
10 percent of the indicated values of Isc, Voc and Pmp under test
conditions (irradiance of 100 MW/cm
2
,AM1.5 spectrum, and a cell temperature of 25
℃
)
●
Under normal conditions, a photovoltaic module is likely to experience conditions that produce more current
and/or voltage than reported at standard test conditions. Accordingly, the values of Isc and Voc marked on this module
should be multiplied by a factor of 1.56 when determining component voltage ratings, conductor ampacity, fuse sizes,
