MN2000000147
Page 3
1 x Driver CD
1 x User Manual
Note: Contents may vary depending on market/region.
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’
s cover.
3.
Remove the slot bracket from an available PCI slot.
4.
To install the card, carefully align the card’
s bus connector with
the selected PCI slot on the motherboard. Push the board down
firmly.
5.
Replace the slot bracket’
s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
For Windows® 2000/XP/Server 2003
1.
Don’t insert the PCI card into PCIe slot.
2.
At the Windows desktop click
Start
, then
Run
.
3.
Type
D:\PCI_IO\MCS9865\XP\PciSetup.exe
, then click
OK
.
(Change
D:
to match your CD-ROM drive letter)
