MN7000000097
Page 11
2.
Entry
“Network adapters”
item, and you can read
“Tehuti
Networks 10GbE Adapter”
in the Device Manager.
2.4.2 Verifying for Linux
1.
You can check whether the driver is loading by using following
commands:
# lsmod | grep tn40xx
# ifconfig –a
If there is a device name, ethX, shown on the monitor, the linux
driver is load. Then, you can use the following command to
activate the ethX.
# ifconfig ethX up, where X=0,1,2,…
