104
IMPORTANT:
Note that this window does not allow you to save the settings as a new
Preset
. Thus, if
you will be cutting this material often, you might prefer to set up a preset for it using the instructions in
Section 2.04.2.
•
After clicking on
Apply
, you will see that both colors now have settings assigned. Because the blue layer is
still selected, its settings show along the bottom:
•
Load the material into the Skycut. Click on
Cut Now
and you will be prompted to load the
Pen Tool
:
3. Enter all settings to
be applied for this cut
1. Select blue
layer
2. Click on
Edit
4. Click on
Apply
Blue layer is selected
Assigned settings
for blue layer
Both layers have settings assigned
