35
1.14.1 Advanced Settings
•
The optional settings in the
Advanced Settings
screen are:
•
Array:
Tap the
Array
button to open the
Array
screen:
In the above screenshot, the shape sent to the Skycut would cut 3 across and 7 up & down, for a total of
21 shapes. The spacing between each shape would be 0.20 inches (Note: to use mm instead of inches,
switch the
Units
setting. Refer to
Section 1.14.2
).
•
Show Point:
When toggled on, the
Main Screen
displays movement and location output based on the
position of the cutting head:
Display (X,Y) location of cutting
head
Option to use laser engraver
Set up rows & columns of repeats
Turn on if you want cutting head
to move to the far right when
cutter is powered on
Separate
Cut Speed
from
Up
Speed
Option to change directions on
up/down keys
Sizing Calibration
Refer to
Section 2.08
Tap here to turn on
Array
Spacing between left-to-right repeats
Number of repeats: left to right
Number of repeats: up & down
Spacing between up-&-down repeats
Repeats for a print and cut application
Refer to
Section 3.08
