57
•
Click on OK and then select which blade type you are using for this new preset Enter the new
Blade Offset
and
Overcut
values. Then click
Update
:
•
Click on
Apply
to close the
Blade Settings Library
. The new preset will now be available for selection in
the
Description
menu.
•
If you need to delete a preset, select it from the
Description
menu and click on the “
-
“ icon to the right.
2.04.2 Saving a Preset for a Material
•
Similar to the blade holder preset, you can enter settings for a particular material.
For example, let’s say you
cut Georgia Pacific 110 lb cardstock at a Force of 55 and a Speed of 8. Use the following steps to create a
new preset in SignMaster:
•
Go to the
Vinyl Spooler>Cut Options
window and click on
Edit Presets
:
•
The
SKYCUT 16
window opens. Click on the
+
icon to the right of the current
Preset
Mode
name
and a
window will open where you can enter the name for your new preset
:
3. Click on
Update
2. Enter new
Blade Offset
and
Overcut
values
1. Select type of blade
4. Click on
Apply
Enter a new name
Click on +
Click on
Edit Presets
