2.
3.
4.
5.
Stop the seat movement where required and select with
a
left or rig
h
t
j
oystick m
o
vement the seat actuator that
needs to be changed.
selected with a right or left m
o
vement of the Joystick. A
ft
er
selecting a n
e
w Memory position, m
o
ving the joystick
forward will operate the seat into the new selected
position
.
MODE
PROFILE
A
Fig.
7
.
9
Fig.
7
.1
0
1.
Remove the rear cover of the backrest and connect a
Switch with a 3
.
5mm Jack to the socket on the CxSM
(Fig.
7
.1
2
).
Fig.
7
.1
1
247556 Rev. A
27
Q700-UP M
7
.
7
.1 Retrieving a Memory Seat
Positio
n
(Fig.
7
.
9
to
7
.1
1
)
A se
a
t icon and the memorydescription or the relevant
position a
r
e shown in the LCDcontrol panel display.
Press the ”Mode” bu
(Fig
y
6.
Move the joystick
forward or backwards until
the required
position is
r
eached. Select other actuators if required and
move them where need
ed
.
8.
Press and hold the
s
witch connected to the CxSM
(Fig.
7
.1
1
) and pull the joystick back
w
ards for 3
secondsuntil a beep
c
an be heard.
7.
Move the
j
oystick l
e
ft or rig
h
t until the
f
actory
m
emory
position is
r
eached and where the new position shall be
programmed in.
7.7.3 Saving a
new position
t
o memo
ry
7.7.2 Return to drive mode
Press the ”Mode” bu
tt
on one or more times u
n
til a
s
tandard
display image with speed indicator appears in the LCD control
panel display.
1.
Press the ”Mode” bu
tt
on, (A), one or more times u
n
til
a
seat icon appears in the LCD control panel display.
9.
n is n
Release the
j
oystick and the bu
tto
n. Your new required
positio
ow
s
tored and the actuators will stop always
in this new programmed end position
.
2.
Move the joystick
t
o the left or rig
h
t to select a memory
seat position
:
1. Seated
2. Supine
3. Pressure Relief
4. Forward Tilt
5. Transfer
6. Stand Up
3. Move and hold the joystick forwards. The seat adjusts
to the factory preset position. The movement can be
stopped at any time and started again when moving the
joystick forward.
4. In any of the 6 memory seat positions moving the
joystick backwards brings the seat into the "Seating"
memory position. Once the seat has adjusted to the
saved position, it stops moving.
releasing the joystick
.
• During a stop period, another memory position
c
an be
tt
on one or more times u
n
til a se
a
t
icon appears in the LCD control panel displa
. 7.13).
Move the joystick
t
o the left or rig
h
t to select a memory
seat position (Fig.
7
.1
4
).
A se
a
t icon and the
memory
description or the relevant position a
r
e shown
in the LCD
control panel display (Fig.
7
.1
3
).
Move and hold the joystick
f
orwards (Fig.
7
.1
4
). The seat
adjusts to the factory preset position. The m
o
vement can
be stopped at any time and
s
tarted again when moving
the
j
oystick
f
orward.
NOTE
:
• Movement of the seat can be stopped at any time
b
y
