5.
As soon as you hear this new sound release the
j
oystick
and the bu
tt
on. All memory positions a
r
e now set to the
factory setting
A
Relax
Fig.
7
.1
3
Fig.
7
.1
4
Fig.
7
.1
5
247556 Rev. A
28
Q700-UP M
7
.
7
.4 Delete custom programmed memory position
1.
Remove the rear cover of the backrest and connect a
Switch with a 3
.
5mm Jack to the socket on the CxSM,
(Complex Seating Module) (
A
-Fig.
7
.1
6
).
2.
Press the ”Mode” bu
tt
on one or more times u
n
til a s
ea
t
icon appears in the LCD control panel display (Fig.
7
.1
3
).
4.
Press and hold the Switch connected to the CxSM
(Fig.7.15)
and pull the joystick back
w
ards for 6 seconds.
A
ft
er 3 seconds you will hear the programming beep and
a
ft
er 6 seconds you will hear a change in the beep
sound.
7
.
7
.5 Return to drive mode
Press the ”Mode” bu
tt
on one or more times u
n
til a
s
tandard
display image with speed indicator appears in the LCD control
panel display.
Fig.
7
.1
2
Refer to Fig.7.12 to 7.15
3.
Move the joystick
t
o the left or rig
h
t to select a memory
seat position (
Fig. 7.14).
A se
a
t icon and the memory
description
for the relevant position a
r
e shown in the
LCD control
panel display
(Fig. 7.13).
