background image

100336 Rev. D

V .   W a r n i n g s   F o r   S a f e   U s e

11

V. WARNINGS FOR SAFE USE

A. TRANSIT USE

1. If possible and feasible, the child should be transferred to a car seat and the

vehicle restraint used.

2. If the mobility device is used for transport and has been installed with the

Transit Option, it must be used in a vehicle equipped for forward-facing secure-
ment during transport.

3. The rider must not weigh more than 150 lbs.
4. Figures 1 & 2 show the location of the transit securement points (A) for this

product.

5. Use only with Wheelchair Tiedown and Occupant Restraint Systems (WTORS) that

have been installed in accordance with the manufacturer's instructions and SAE
J2249. (See your local medical equipment supplier.)

6.  Attach WTORS to securement points in accordance with the manufacturer's

instructions and SAE J2249.

7.  Attach occupant restraints in accordance with the manufacturer's instructions

and SAE J2249.

NOTE– 

To obtain a copy of SAE J2249 Wheelchair Tiedown and Occupant Restraint Systems for
Use in Motor Vehicles, please contact the Society of Automotive Engineers 724/776-4841
or www.sae.org/

1

2

A

A

Summary of Contents for Kid Kart




























Reviews: