ENGLISH
9
Krypton F
Rev.1.0
Area of Application.
The variety of options as well as the modular design
means that it can be used by those who cannot walk or
have limited mobility because of:
• Paralysis
• Loss of extremity (leg amputation)
• Extremity defect deformity
• Joint contractures/joint injuries
• Illnesses such as heart and circulation deficiencies,
disturbance of equilibrium or cachexia as well as for
elderly people who still have strength in the upper body.
When considering provision, please also note the body
size, weight, physical and psychological constitution, the
age of the person, living conditions and environment.
DANGER!
• After an accident, fall or dropping the wheelchair, it
should no longer be used for safety reasons and should
be sent to Sunrise Medical for inspection.
• The wheelchair should be regularly inspected for
damage (cracks, discolourations, etc.).
• If the surface of the carbon components is damaged
(indents or scratches which are deeper than the varnish
layer) then the wheelchair should be sent to Sunrise
Medical for inspection.
• During transportation (especially when traveling by air),
ensure that the wheelchair does not come into contact
with other items of luggage. Under no circumstances
may luggage be loaded onto the wheelchair. Ensure
that the wheelchair is firmly secured for slipping.
• Pay attention to creaking noises when using the
wheelchair as these could indicate damage to the
fibre structure. If applicable send to the wheelchair to
Sunrise Medical for inspection.
• Replace damaged components immediately - damage
to carbon components cannot be repaired.
• Accessories from third party suppliers such as
handbikes, front wheels, or other non-standard fittings,
are not permitted.
• Do not exceed the prescribed torque for all clamps and
screws.
• Never attach any extensions using clamps or screws.
• Never mechanically alter or drill the carbon
components.
• Never expose the wheelchair to high temperatures
(such as for example as may happen to vehicles
parked in the sun) or store near to heat sources.
• Clean the carbon components exclusively with a damp
cloth and clear, cold or lukewarm water, or with added
detergent if required.
• Never use any type of solvent or solvent-based cleaner,
alcohol or acetone. Do not use any polish or abrasive
varnish cleaner.
