background image

Quickie 

®

 NITRUM

249817 Rev. A

14

VII. WARNINGS: COMPONENTS & OPTIONS

N. SEAT AND BACK UPHOLSTERY

WARNING

1. 

Replace worn or torn fabric of seat and seat back as soon as you can. If 
you fail to do so, the seat or seat back may fail.

2. 

Sling fabric will weaken with age and use. Look for fraying, thin spots, or 
stretching of fabrics especially at edges and seams.

3. 

“Dropping down” into your chair will weaken fabric and result in the need 
to inspect and replace the seat more often. 

4. 

Be a

ware that laundering or excess moisture will reduce the fl ame 

retardation qualities of the fabric.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of 
control may occur and cause severe injury to the rider or others.

O. BACKREST TENSION ADJUSTABLE

WARNING

The Tension Adjustable Backrest is a versatile back intended to replace standard 
wheelchair back upholstery. It is designed to provide simple, comfortable and 

eff ective support to help maximize function and increase seating tolerance.  In 
addition, it is lightweight, durable, and easy to use.

Sunrise Medical recommends that a clinician such as a doctor or therapist 
experienced in seating and positioning be consulted to determine if the 
Backrest Tension Adjustable is appropriate. Back systems should only be installed 
by an authorized Sunrise Medical supplier.

Maximum user weight 275lbs. (125 kg.)

WARNING

Installing a back support on a wheelchair may aff ect the center of gravity of the 
wheelchair and may cause the wheelchair to tip backwards potentially resulting 
in injury.

Always assess for the potential need for anti-tippers to be added to the 
wheelchair to help increase the stability.

WARNING

Do not use the Backrest Tension Adjustable to push or lift the wheelchair. 
Improper use may cause the back to unexpectedly detach from the wheelchair.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of 
control may occur and cause severe injury to the rider or others.

P. FREESTYLE BACK (Option)

WARNING

The Freestyle Adjustable Backrest is a versatile back intended to replace 
wheelchair back upholstery. It is designed to provide simple, comfortable and 
eff ective support to help maximize function and increase seating tolerance.  In 
addition, it is lightweight, durable, and easy to use.

Sunrise Medical recommends that a clinician such as a doctor or therapist 
experienced in seating and positioning be consulted to determine if the Integral 
Adjustable Backrest is appropriate. Backs should only be installed by an 
authorized Sunrise Medical supplier.

Maximum user weight 275lbs. (125 kg.)

WARNING

Installing a back support on a wheelchair may aff ect the center of gravity of the 
wheelchair and may cause the wheelchair to tip backwards potentially resulting 
in injury.

Always assess for the potential need for anti-tippers to be added to the 
wheelchair to help increase the stability.

WARNING

Do not use the Freestyle Adjustable backrest to push or lift the wheelchair. 
Improper use may cause the back to unexpectedly detach from the wheelchair.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of 
control may occur and cause severe injury to the rider or others.

Q. FOLDING LOCK DOWN ANGLE 
ADJUSTABLE BACKREST

WARNING

Only adjust backrest angle when in a safe and stable position. You may increase 
the likelihood of tipping or instability.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of 
control may occur and cause severe injury to the rider or others.

R. SEAT BACK

WARNING

Adjusting the seat back depth could cause the strut tube to be located in a 
position where it could contact the user and cause skin breakdown or other 
serious injuries.

If you fail to heed these warnings damage to your chair, a fall, tip-over or loss of 
control may occur and cause severe injury to the rider or others.

S. BACKREST - TOWEL BAR

WARNING

NOTE:

 extreme impact or force to the backrest towel bar may cause 

degradation or failure of the towel bar, release bar or the function of the 
backrest.

Summary of Contents for Quickie Nitrum





































Reviews: