17
Q700M Rev.A
1
A
Removal of drive wheel from wheelchair base
Preparation
Note!
Switch off the wheelchair via remote control
Instructions
Note!
Suitable work area required!
•
Follow the illustrated instruction for removing the drive
wheel from the wheelchair base
•
Rebuild the wheelchair in reverse order once completed.
Tools used
16
Fig. 6.2.6
1.
Remove the 3 (A) nuts from the centre of the drive wheel
Tightening torque for (A) bolt is 34Nm.
Fig. 6.2.7
2.
Remove drive wheel (B) from base
2
B
Fig. 6.2.6
Fig. 6.2.7
Summary of Contents for Quickie Q700-UP F
