18
Q700M Rev.A
1
A
Removal of bearings inside castor fork
Preparation
Note!
Switch off the wheelchair via remote control
Instructions
Note!
Suitable work area required!
•
Follow the illustrated instruction for removing the bearings
inside the castor fork.
•
Rebuild the wheelchair in reverse order once completed.
•
In order to complete this, you must first remove the castor
fork.
Tools used
31
Before removing bearing, remove C-clip underneath using a
screwdriver and then pliers to re-insert into groove.
Fig. 6.2.8
1.
Punch the bearings (A) out using a steel bar just less than the
diameter of the bearings (31mm)
Fig. 6.2.9
2.
Once the bearings (A) have been punched out of the casting they
will then become loose
Fig. 6.2.10
3.
Remove and change the desired parts accordingly
2
A
3
A
Fig. 6.2.8
Fig. 6.2.9
Fig. 6.2.10
Summary of Contents for Quickie Q700-UP F
