37
Sedeo UP M Rev.A
1
A
2
B
Q700 UP M - Removing the V3 castor lock kit
Preparation
Note!
Switch off the wheelchair via remote control (power
wheelchair only).
Instructions
Note!
Suitable work area required!
•
Follow the illustrated instructions for removing the V3
castor lock kit
•
Rebuild the wheelchair in reverse order once completed.
Tools used
6
13
NOTE: Please electrically disconnect the castor lock kit before
removing
Fig. 6.2.49
1.
Unscrew and remove 2 x bolts (A) from the castor lock kit
Tightening torque for (A) bolts is 22Nm
Fig. 6.2.50
2.
Simultaneously, remove the nut (B) using the 13mm spanner
located on the back of the bottom bolt
Fig. 6.2.51
3.
Remove the castor lock kit (C) from the wheelchair base
Fig. 6.2.49
Fig. 6.2.50
3
C
Fig. 6.2.51
Q700 Up M Caster Lock V2 to V3 Exchange Procedure
Caster Lock change V2 to V3 requires a reprogramming of the wheelchair.
Web IQ required / If you do not have access data, contact our customer
service
WARNING:
Any changes must be made to both sides.
VIDEO INSTRUCTION
Summary of Contents for Quickie Q700-UP F
