930473 Rev. B
X I . M a i n t e n a n c e
19
E n g l i s h
XI. MAINTENANCE
A. NOTES
1. Proper maintenance will improve performance and extend the useful life of your seat-
ing system.
2. Clean your seating system regularly. This will help you find loose or worn parts and
will make your seating system easier to use.
3. To protect your investment, have all major service and repair work done by your supplier.
B. CLEANING
1. Paint Finish:
•Clean the paint finish with mild soapy water monthly.
•Protect the paint with a coat of non-abrasive auto wax every three months.
NOTE–
You do not need to grease or oil the chair.
2. Upholstery:
•Hand-wash only as needed. Machine washing may damage fabric.
•Drip-dry only. Heat from a dryer may damage fabric.
NOTE–
Washing the fabric may decrease fire retardant properties.
C. STORAGE TIPS
1. Store your seating system in a clean, dry area. If you fail to do so, parts may rust or
corrode.
2. Before using your seating system, make sure it is in proper working order. Inspect
and service all items on the “Maintenance Chart” (See section XI: F).
3. If you store this seating system for more than three months, have it inspected by a
supplier before use.
D. ORDERING PARTS
When you order parts, provide the following:
1. Model of chair
2. Serial number of chair– located on power base
3. Left hand or right hand control
4. Part number, description and quantity of parts you need.
5. State reason for replacement.
E. RE-HOME SEAT FUNCTION
User should never be seated in seating system when operating Re-Home function.
For convenience, a Re-Home Seat button (A) is located under the back plate shroud. To re-
home seating system, press and hold the button, continuing to hold button down for three
to four seconds after all actuators have ceased movement. This is recommended as quarterly
maintenance to keep system calibrated.
A
Summary of Contents for Quickie Smart Seat
Page 23: ......
