35
Delphin Rev.C
ENGLISH
24.0 Disposal / recycling of materials
NOTE:
If the wheelchair has been supplied to you free of
charge it may not belong to you. If it is no longer required
follow any instructions given by the organization issuing
the wheelchair in order that it may be returned to them.
The following information describes the materials used in
the wheelchair in relation to the disposal or re-cycling of
the wheelchair and its packaging.
Specific waste disposal or recycling regulations may
be in force locally and these should be taken into
consideration when disposal arrangements are made.
(This may include the cleaning or de-contamination of the
wheelchair before disposal).
Aluminum:
side frame, armrests, leg rest,
backrest
Stainless Steel:
Fasteners, QR axle, axle adapter
Composite:
Handgrips, tube plugs, castor
wheels, footplate, armpads, seat,
back, armrest receiver, wheels, tires
Packaging:
Cardboard box
Disposal or recycling should be done through a licensed
agent or authorized place of disposal. Alternatively your
wheelchair may be returned to your dealer for disposal.
25.0 Technical Specifications
Technical Specifications
Overall width:
With standard wheels including handrims: SW + 190 mm
Weight in kg:
• Transportation (without wheels & seat) 9.9 kg
• Wheels (unit) 2.7 kg
Maximum user weight:
• Delphin up to a load of 130 kg
ADDITIONAL NOTES
In Accordance with EN12183: 2009 all there listed parts
(seat - back upholstery, arm pad, side panel...) are fire
resistant as per EN1021-2.
WARNING!
The Dynamic safe slope is dependent on the chair
configuration, the user’s abilities and the style of
riding. As the users abilities and style of riding cannot
be predetermined then the max safe slope cannot be
determined. Therefore this must be determined by the
user with the assistance of an attendant to prevent
tipping.
It is strongly recommended that inexperienced users
have Ant-tips fitted.
The wheelchair conforms to the following standards:
a) Requirements and test methods for static, impact and
fatigue strengths (ISO 7176-8)
b) Requirements for resistance to ignition in accordance
with ISO 7176-16 (EN 1021-1)
Operating conditions
Ambient temperature 10 - 65 °C
Relative humidity 15% - 93%, non-condensing
Atmospheric pressure 795 - 1060 hPa
Storage and shipping conditions
Ambient temperature 0 - 65°C
Relative humidity 30% - 75%, non-condensing
Atmospheric pressure 795 - 1060 hPa
Summary of Contents for QUICKIE SOPUR Delphin
Page 7: ...7 Delphin Rev C 5 6 7 8...
Page 106: ...106 Delphin Rev C...
Page 107: ...107 Delphin Rev C...
