54
ENGLISH
Nitrum / Nitrum Hybrid Rev.C
Total width:
With 25" standard wheels, incl. handrims with 6° camber: SW + 300 mm
Overall length:
930 mm with SD 500
Total height:
950 mm with BH 450
Weight in kg:
from 6.5 kg
Maximum load:
Nitrum 125 kg (140kg with optional Hybrid frame).
Seat heights:
The choice of frames, forks and castors, as well as the rear wheel size (24”, 25”) determines the seat heights which can be achieved.
Norm
Min.
Max.
Norm
Min.
Max.
Overall length with
footrest
770 mm
930 mm
Seat surface angle
0°
16°
Overall Width
490 mm
860 mm
Effective seat depth
340 mm
500 mm
Folded length
N/A
N/A
Effective seat width
320 mm
500 mm
Folded width
N/A
N/A
Seat surface height at
front edge
430 mm
570 mm
Folded Height
N/A
N/A
Backrest angle
59°
105°
Total Mass
6.5 kg
13.0 kg
Backrest height
250 mm
450 mm
Slope for the use of
the wheel locks
0°
7°
Turning radius
700 mm
Mass of the heaviest
part
-
2.1 kg with
24" rear wheel
*
Distance from the
footrest to the seat
220 mm
520 mm
Static stability
downhill
10°
10°
Angle from leg to seat
88°
100°
Static stability uphill
with anti-tip tubes
10°
10°
Distance from the
armrest to the seat
N/A
N/A
Static stability
sideways
10°
10°
Front location of
armrest structure
N/A
N/A
Dynamic stability -
uphill power
consumption
N/A
N/A
Handrim diameter
540 mm
567 mm
Overcoming
obstacles
N/A
N/A
Horizontal location
of axle
+ 104 mm
+ 20 mm
12.0 Technical Data
*Standard wheel with stainless steel handrim
The wheelchair conforms to the following standards:
a) Requirements and tests for static strength, impact resistance and fatigue strength (ISO 7176-8)
Yes.
b) Drive and control systems for power wheelchairs, requirements and test (ISO 7176-14)
n.a.
c) Environmental test in accordance with ISO 7176-9
n.a.
d) Flammability resistance of upholstered parts in accordance with ISO 7176-16 (EN 1021-1/2)
Yes.
