background image

Hilite User Manual |  

Hilite User Manual

UM-Hilite-020-EU

2

Thank you for choosing an RGK product,

Welcome to the RGK family and we hope the product and service you have 

received has exceeded your expectations. Please take the time to read the 

instructions and familiarise yourself with your new wheelchair to ensure you 

benefit from the maximum safety, performance and longevity.

We want you to be fully satisfied with our products and services and we are 

constantly working to develop our products further. For this reason, changes 

can occur within our range of products with regard to form, technology 

and equipment. Consequently, no claims can be construed from the data or 

pictures contained in this user manual.

Sunrise Medical declares that 

the lightweight wheelchairs 

conform to the MDR 

2017/745.

Sunrise Medical GmbH

Kahlbachring 2-4

69254 Malsch/Heidelberg

Deutschland

Tel.: +49 (0) 7253/980-0

Fax: +49 (0) 7253/980-222

www.SunriseMedical.de

NOTE:

Medical Device Regulation (EU) 2017/745

General user advice.

Not following these instructions may result in physical injury, damage to 

the product or damage to the environment!

A notice to the user and/or patient that any serious incident that has 

occurred in relation to the device should be reported to the manufacturer 

and the competent authority of the Member State in which the user and/or 

patient is established.

As the manufacturer, SUNRISE MEDICAL, declares that the lightweight 

wheelchairs conform to the Medical Device Regulation (2017/745).

Set Up Guide:

1.  Carefully remove product and any loose parts from the box and 

ensure nothing is left in the packaging.

2.  Read contents of this user manual thoroughly and understand the 

safety risks.

3.  Attach the wheels and separate parts.

4.  Check everything is as expected and that all parts are secured, 

functioning and set up correctly, including tyre pressure.

5.  Adjust the upholstery ensuring it provides the right levels of support 

to suit your posture and comfort requirements.

6.  Adjust the footplate height if required to ensure the correct support 

for your feet and balance.

7.  Once ready and in a safe environment, carefully transfer into your new 

wheelchair and ensure it functions correctly.

8.  Before going outdoors or on rougher terrain, ensure you have fully 

tested the wheelchair and are confident with the balance point and 

how the chair functions.

9.  If you have questions on the set up of your wheelchair, please contact 

your local authorized dealer. Happy rolling!

WARNING:

Do not operate this equipment 

without first reading and 

understanding this user manual. If 

you are unable to understand the 

warnings and instructions, contact 

RGK or a healthcare professional 

(doctor / therapist) before attempting 

to use this equipment - otherwise 

injury or equipment damage may 

result.

NOTE:

B4Me special adaptations

Sunrise Medical strongly recommends 

that in order to ensure that your B4Me 

product operates, and performs as 

intended by the manufacturer; all the 

user information supplied with your 

B4Me product is read and understood, 

before the product is first used.

Sunrise Medical also recommends that 

the user information is not discarded 

after reading it, but it is kept safely 

stored for future reference.

NOTE:

Medical Device Combinations

It may be possible to combine this 

Medical device with one or more 

other Medical Device or other 

product. Information on which 

combinations are possible can be 

found at www.Sunrisemedical.co.uk. 

All combinations listed have been 

validated to meet the General Safety 

and Performance Requirements, 

Annex I Nr. 14.1 of the Medical Device 

Regulation 2017/745.

Summary of Contents for RGK HILITE

























Reviews: