Hilite User Manual | Service Inspection Checklist
Hilite User Manual
UM-Hilite-020-EU
9
Service Inspection Checklist
Item
Initially
Inspec
t/
Adjust
W
eek
ly
nspec
t/
Adjust
M
on
thly
nspec
t/
Adjust
Year
ly
General
• Wheelchair rolls straight (no excessive drag or pull to one side)
• Inspect frame for cracks and damage
• Inspect all fasteners are secured
ü
ü
ü
Wheel Locks
• Do not interfere with tyres when rolling
• Pivot points free of wear and looseness
• Wheel locks easy to engage
ü
ü
ü
ü
ü
ü
Seat and Back Upholstery
• Inspect for rips or sagging
• Inspect fastening flaps to ensure they securely latch
ü
ü
ü
ü
Rear Wheels
• Adjustable axle position camber bar is securely tightened
• Quick/quad release axles lock properly
• No excessive side movement or binding when lifted and spun
ü
ü
ü
ü
ü
ü
Handrims
• Inspect for signs of rough edges or peeling
ü
ü
Spokes
• Inspect for bent or broken spokes
• All spokes uniformly tight
ü
ü
ü
ü
Front Castor
• Inspect wheel/fork assembly for proper tension by spinning castor;
castor should come to a gradual stop
• Loosen/tighten locknut if wheel wobbles noticeably or binds to a
stop
• Wheel bearings are clean and free of moisture
CAUTION: As with any vehicle, the wheels and tyres should be
checked periodically for cracks and wear, and should be replaced
when necessary
ü
ü
ü
ü
ü
ü
ü
Tyres
• Inspect for flat spots and wear
• If pneumatic tyres check for proper inflation
CAUTION: As with any vehicle, the wheels and tyres should be
checked periodically for cracks and wear, and should be replaced
when necessary
ü
ü
ü
ü
Cleaning
ü
ü
NOTE:
Regular cleaning will help to highlight any loose or worn parts and enhance the smooth operation of your wheelchair. To
operate properly and safely, your wheelchair must be cared for just like any other vehicle. Routine maintenance will extend
the life and efficiency of your wheelchair. Initial adjustments should be made to suit your personal body structure and
preference. Thereafter follow these maintenance procedures. Outlined below:
