11
EN
GLISH
Elite
2
Mini XS Plus Rev.B
4.0 Setting up the scooter
Sunrise Medical scooters can be adjusted according to specific
needs of the user.
Pre-settings are carried out once, the first time the scooter
is going to be used. They must be executed by a qualified
specialist, unless explicitly stated otherwise.
4.1 Seat height (Fig. 4.1)
1. Loosen (A).
2. Adjust (B) to the desired position.
3. Tighten (A).
Fig. 4.1
A
B
KM
Fig. 4.2
4.2 Handlebar Adjustment
CAUTION!
The handlebar angle can be adjusted to suit the users needs,
(Fig 4.2). The handlebar is clamped within the control system.
Your dealer or supplier can adjust the angle of the handlebar
if needed. Do not attempt adjustment of this yourself.
Damage to the control system of the scooter could happen if
unauthorized adjustment is carried out.
4.3 Elite
2
Plus tiller height adjustment (Fig. 4.3)
The Elite
2
Plus tiller has a standard height adjustment of 0mm
– 50mm.
1. Loosen (A), with 6 mm Allen key.
2. Adjust (B) to the desired position, carefully pull the tiller
up using the tiller steering handle.
3. Tighten (A).
Fig. 4.3
B
A
Fig. 4.4
A
B
C
4.4 Tiller Adjustment (executed by the user) (Fig. 4.4)
DANGER!
• Do not adjust the tiller while the scooter is being driven as
serious injury could happen if you lose control.
• Do not use the tiller adjustment handle to hold or carry
items such as bags etc.
• Ensure fingers or other items are not around the area of the
lower tiller when making adjustments. Serious injury could
happen due to entrapment.
1. Rotate (A) clockwise.
2. Hold (B) and move (C) to the required position.
