30
EN
GLISH
Elite
2
Mini XS Plus Rev.B
6.3 Throttle select switch
This switch is used to select between the foot control and any
handlebar control.
NOTE:
A latching, (push On-push Off), type switch is used for
this function, (Fig.6.11).
WARNING!
When the scooter is turned off, the control that was selected at
the time of switching off will still be selected when the scooter
is turned back on again.
Use caution when first starting off after a break in driving.
Keep any luggage/bags, clear of fouling the foot control at all
times.
6.4 Directional switch
This switch is used to select between the forward or reverse
direction of travel, (Fig.6.12).
The directional switch is always used with any non-wigwag
throttle, i.e. foot control and twist grip throttle.
When reverse is selected a warning flashing arrow appears on
the LCD display of the Elite
2
XS -RS, (Fig.6.13 - A), or scrolling
arrows appear on the LCD display of the Elite
2
Plus, (Fig.6.14 - B).
WARNING!
• When the scooter is turned off, the direction that was
selected at the time of switching off will still be selected when
the scooter is turned back on again.
• Use caution when first starting off after a break in driving.
• Use caution when reversing.
• Always stop the scooter before switching between forwards
and reverse.
• Do not reverse downhill on an uneven surface.
• Do not reverse and turn on any uneven surface.
• Never reverse around a blind corner.
• Always give way to people on foot.
If your head/neck movement is restricted when reversing:
• Use your mirrors.
• Select the lowest usable speed setting.
• Do not make any sudden manoeuvres.
• Listen out for any audible clues, (children shouting, running
etc).
• Be prepared to stop immediately.
KM/H
KM
H
Fig. 6.11
Fig. 6.12
Fig. 6.13
Fig. 6.14
A
B
