249056 Rev.
C
7
Cool Cube
Audible Feedback and
M
ounting:
WARNING
1. If user requires audible feedback while using the Cool Cube ensure Cool Cube hub is mount
ed
where the user can
hear the speaker, such as closer to the user’s ear.
Port Usage:
WARNING
1.
A switch or sensor must be plugged into the port for it to operate.
2.
Label on Cool Cube describing port functionality may be difficult to read in direct sunlight or may become
bleached by the sun over time. Use this documen
t's
figures to appropriately identify the port functionality.
3.
If a switch or sensor come
s
unplugged it will cease to operate.
4.
There are 6 ports on the Cool Cube:
a.
Forward - Used for forward movement of the wheelchair.
b.
Reverse - Used for reverse movement of the wheelchair.
c.
Right - Used for right movement of the wheelchair.
d.
Left - Used for left movement of the wheelchair.
e.
Mode - Used for mode changes of the wheelchair.
f.
Off - Used for
the
off
function
of the wheelchair.
5.
While in 2 Switch Driving or 3 Switch Driving, there will be a slight delay in the Forward(Reverse) command
before the chair will start to move. This is to allow the possibility of tap to change direction of movement.
PREVENTATIVE MAINTENANCE
1.
Ensure that the Cool Cube and associated switches are protected from prolong exposure to water.
2.
Cleaning
p
rocedure:
a.
Power down wheelchair and unplug Cool Cube,
s
witches and
s
ensors.
b.
Use clean lint free cloth and mild soap to gently wipe down surfaces of Cool Cube,
s
witches, and
s
ensors.
c.
Once wiped down use a dry lint free wipe and remove any moisture from surface of Cool Cube, switches,
and
s
ensors.
WARNING
Mounting and Cable routing procedure:
WARNING
1.
Ensure Cool Cube is firmly mounted to
powerchair
using Velcro or double sided adhesive.
2.
Cool Cube should be mounted out of the way of the movement of the seat actuators.
3.
Ensure all cable routing is held securely to the
powerchair
. This can be accomplished using cable ties.
4.
There should not be any loose cabling. The loose cable could get caught on an object while moving causing the
device to become unplugged resulting in a failure to control your
powerchair
.
1.
Do not allow Cool Cube, switches, or sensors to come into contact with an open flame. This could cause
devices to malfunction or degrade in usability.
General Warnings:
WARNING
Flammability:
1.
Do not rest any objects on the device.
2.
Ensure wheelchair is powered off when in a vehicle or during patient transfer.
3.
Ensure wheelchair is powered off when changing switches or sensors.
4.
Do not use in inclement weather, i.e. rain, snow or hail.
5.
If the wheelchair or Switch It device behaves erratically, please contact your local dealer or Switch
-
It rep.
WARNING
Summary of Contents for Switch-it Cool Cube
Page 1: ...249056 Rev C Switch It Cool Cube Owner s Manual...
Page 9: ...249056 Rev C 9 Cool Cube...
Page 10: ...249056 Rev C 10 Cool Cube...
Page 11: ...249056 Rev C 11 Cool Cube...
