REMOTE CONTROL
MODE :
to set the air
conditioner in
AUTO, COOL
or
FAN
mode
SLEEP :
to set the air con-
ditioner in SLEEP mode
I/O (ON/OFF) :
to start or
close the air conditioner
TIMER :
to set the timer or
the clock (time)
DRY :
to set in
DEHUMIDIFYING mode
SEND : i
nitiate all operations
of the air conditioner
+oC / -oC :
to set temperature
To set the number of hours
when the timer is on or the
time (clock)
LCD DISPLAY
FAN :
to set fan speeds
*Product may differ from picture or line art.
TO START OR STOP THE AIR CONDITIONER :
Press on the
I/O (ON/OFF)
button.
TO SET THE MODE :
• Press on
MODE
until the matching icon flashes on the remote LCD display
:
for COOLING mode
,
for FAN ONLY mode ou for the
AUTO
mode.
• Press on
SEND
to initiate the operation on the air conditioner ; a “beep” will confirm
transmission and the icon will stop flashing.
*
IMPORTANT
: some screen may display a “sun” icon for HEATING mode; this mode is available only
on some models.
TO SET FAN SPEED :
• Press on
FAN
and choose the speed :
HIGH, M (Medium) or LOW -
each speed icon will flash.
• Press on
SEND ;
a “beep” will confirm transmission and the speed icon will stop flashing.
TO SET TEMPERATURE :
• Press on
+oC
o
r
-oC
to set the desired température - the temperature icon will flash. The
temperature is increased or decreased by 1o each time you press on these buttons.
The temperature settings range from 16oC to 30oC (61oF to 86oF).
• Press on
SEND ;
a “beep” will confirm transmission and the temperature icon will stop flashing.
N
OTE
:
all the above operations can be keyed in on the remote control before pressing on
SEND
to initiate the operations on the air conditioner.
EX. :
to set your air conditioner in
COOLING
mode, at
HIGH
fan speed and at
22oC :
• press on
MODE
until the
COOLING
flashing icon shows on the LCD display ;
• then, press on
FAN
until the
HIGH
flashing icon shows on the display - when pressing on
FAN,
the cooling icon will stop flashing;
• then, press on
+oC
or
-oC
until you reach
22oC
- the temperature icon will flash and the
FAN
i
con will stop flashing ;
• to complete, press on
SEND
- a “beep” will confirm transmission and the temperature icon willl
stop flashing.
12
