Positioning Your Swing
1.
The swing is designed to be installed on a level surface.
2.
There should be a minimum clearance of four feet in front and back, and two feet on
each side of your swing. It should be placed in an area where children will not stray or
walk into the path of the swing.
Tools required for assembly
1.
9/16” box wrench
2.
7/16” box wrench
3.
4 mm Allen wrench (included)
4. 3/8” socket wrench
5. 9/16” socket
Helpful installation hints
1.
At least 2 people are required to assemble this swing. Some parts are large and
heavy. Use care when handling.
2.
Identify all of the parts for your swing. Empty the box and lay out the parts for
identification using the Parts List.
3.
Read all the way through the instructions completely before beginning the assembly.
4.
Do not tighten hardware completely until instructed. It helps to have some
adjustment for bolt alignment while you are connecting parts. Follow the tightening
sequence as mentioned in the in steps.
After you have completed the assembly,
recheck that all hardware is secure and tight.
Page 3
