Operation Instruction
31
1. Unplugging the MINI USB cable;
2. Powering off the GPS navigator;
3. Resetting the system;
4. Tap the on close button on the top right.
6.10 Navigation Path
Insert a T-flash card with map data into the GPS navigator and tap
to enter the interface
shown as below.
Select a map address and tap
to save the setting.
Tap to select a map address.
Tick in the box to run the set navigation map when the navigator is
powered on.
6.11 Restoring the Factory Setting
Tap
in the setting interface to restore the factory setting. The following dialog will be
prompted.