Operation Instruction
8
1.3 Basic Use
1.3.1 Powering on/off & Sleep
2.3.1.1 Powering on
Press the power key on the top side of the GPS navigator for at least two seconds to power it on.
[Note] Great humidity fluctuation may lead to short circuit of the GPS navigator. Power on the
navigator after it has accommodated to new environment.
2.3.1.2. Powering off & Sleep
Long press the power key to power off the GPS navigator. The following interface will be
prompted. If
is selected, the navigator will automatically resume the state before entering
sleep mode when powered on again.
1.3.2 Restarting the System
When the system does not response, press the reset key on the back of the GPS navigator to restart
the system.
[Relevant Information] The following situations might lead to no response of the system.
1. Delay or stagnancy in interface switching;
2. Failure of function activation with overlong execution;
3. Failure to power on/off the GPS navigator by pressing the power key
[Note] Restarting the system by pressing the reset key will result in loss of unsaved data. Please
backup your data regularly.