Shenzhen SUNSKY Technology Limited
3
4.
Frame rate the: 15FPS/30FPS (default setting)
5.
Light frequency: 50Hz (default setting) / 60Hz
6.
Date / Time:
Two menu keys
⑷
standby mode, press to enter the setting interface, press the
down arrow key to
⑹
set
⑺
press the Enter key to save.
7.
Video: Off / 2 minutes (default setting) / 5 minutes / 15 minutes. When the option to turn off
the TF card is full will stop recording, does not loop video
8.
Date Label: Off / On (default setting). When the Select option to turn off, video is not
the time display.
9.
Default settings: cancellation / confirmation. Select OK, the DVR will revert to factory
settings.
10.
Motion detection: Off (the default) / open
11.
Recording: OFF / ON (default setting)
12.
Version: Displays the system version number
Download
USB cable to connect the DVR to your PC, the two options will be displayed on the display
(connected to the computer / webcam), keep in mind the need to insert a memory card.
HD TV or monitor preview
Using high-definition cable DVR and HDTV, the DVR will automatically enter the preview mode,
preview mode, and preview the same steps on the screen.
Note
：
1.
Please insert the TF card in the video before the first
2.
This DVR recording mode selectable loop recording, when the storage medium is full, the
DVR will automatically again from the original storage media to start recording a new
content and overwrite the old file.Overwrite the old files at the same time, the DVR will have
about three seconds of time blind, DVR will stop the recording time of about 3 seconds.
3.
Please use the included USB car charger for DVR-powered car charger containing 12V/24V
switch to 5V adapter. If the output voltage is greater than 5V, the DVR will be burned.
Technical parameters
：
1.
Video size
：
（
1920
×
1080
）
（
1440
×
1080
）
(1280
×
720)
2.Compression format
：
H.264
3.Loop recording
4.Power supply: Rechargeable lithium battery / USB Car Charger
5.Support TF card: maximum support to 32G
6.Recording: recordable
7.Output: USB
