22--22
2.1.1
Origin
This function can be used while the embroidery is not operating. It works as the “Return to Origin” on the
screen. Press
to move the needle bar to the origin of a pattern.
2.1.2
Holding
This function operates the holding solenoid. It is used for normal embroidery machine. Press
to activate
this function.
2.1.3
Needle Dn/ Needle Up
In order to accurately set the position of the first needle before starting embroidery, you can lower the needle bar by
pressing
. After lowering the needle, you can use the direction buttons to move the frame to set the
accurate needle position. In order to return the needle to the original position, press
. These functions are
available only in the normal embroidery machine.
2.1.4
Language
Nine languages including Korean, English, Spanish, German, Danish, Italian, Indonesian, Chinese, and Turkish are
supported. Users can choose a language of their convenience among the nine languages. Press
and select a
desired language.
2.1.5
Needle Origin
You can return the needle bar of the Chenille embroidery machine to the origin.
Press .
2.1.6
Looper Origin
You can move the looper of the Chenille embroidery machine to the origin. Press
.
2.1.7
All Head (Back)
When the thread in one of the heads breaks, but it is desired to continue the embroidery work with remaining heads,
you can use this function.
2.1.8
Sequin Lift / Sequin Feed
This function tests the sequin device after the sequin device installation is completed.
