60
No.
Function
Step
Initial value
Caution : When any inputs PIN No. INPUT00
INPUT22 are overlapped, it works as the "OR" circuit.
Ex) if INPUT00 = 0 & INPUT01 = 0, then it is recognized as
“
button A
”
= I INPUT01.
The hardware of input switches and sensors are done with
“
a point of contact/Active High
”
input as the standard.
When setting up other functions numbers apart from the ones listed above, the pertinent output pin functions are disregarded.
[ Caution ]
If the specific items of the parameter are changed carelessly, they could break down or damage the machine, so the user must be
well-trained before using it.
50
INPUT00 (Button A)
0
51
INPUT01 (Button B)
1
52
INPUT02 (1/4 stitch Switch)
2
53
INPUT03 (2/4 stitch Switch)
3
54
INPUT04 (3/4 stitch Switch)
4
55
INPUT05 (4/4 stitch Switch)
5
56
INPUT06 (Left Sol. Switch)
6
57
INPUT07 (Right Sol. Switch)
7
58
INPUT10 (Presser Foot-Lift Switch)
8
59
INPUT11 (Counter Switch)
9
60
INPUT12 (P/U 1/2 stitch Switch Signal)
10
61
INPUT13 (Safety Switch Signal)
11
62
INPUT14 (Edge Sensor Signal)
12
63
INPUT15 (Thread trimmer not allowed Signal)
13
64
INPUT20 (Pedal Start Signal)
16
65
INPUT21 (Pedal Presser Foot-Lift Signal)
17
66
INPUT22 (Pedal Trim Signal)
18
70
Output Signal Level Collective Reverse Function
0
0/1
1=Output signa Collective Reverse¸ selection
71
Input Signal Level Collective Reverse Function
0
0/1
1=Input signal Collective Reverse¸ selection
72~
NOT USED
99
NOT USED
Output port changing function
- Write the function number
on the output PIN you want
to change after referring to
the table below
B : Input PIN function
No.
0
Button A Switch
100
inv Button A Switch
1
Button B Switch
101
inv Button B Switch
2
1/4 stitch Switch
102
inv 1/4 stitch Switch
3
2/4 stitch Switch
103
inv 2/4 stitch Switch
4
3/4 stitch Switch
104
inv 3/4 stitch Switch
5
4/4 stitch Switch
105
inv 4/4 stitch Switch
6
Left Solenoid Switch
106
inv Left Solenoid Switch
7
Right Solenoid Switch
107
inv Right Solenoid Switch
8
Presser Foot-Lift Switch
108
inv Presser Foot-Lift Switch
9
Counter Switch
109
inv Counter Switch
10
Program Unit 1/2 stitch Switch
110
inv Program Unit 1/2 stitch Switch
11
Safety Switch
111
inv Safety Switch
12
Edge Sensor Signal
112
inv Edge Sensor Signal
13
Thread Trimmer Signal
113
inv Trimming Disabled Signal
14
Roller Lift Switch
114
inv Roller Lift Switch
15
N_AUTO Switch
115
inv N_AUTO Switch
16
Pedal Start Signal
116
inv Pedal Start Signal
17
Pedal Presser Foot-Lift Signal
117
inv Pedal Presser Foot-Lift Signal
18
Pedal Thread Trimming Signal
118
inv Pedal Thread Trimming Signal
19
External Signal
119
inv External Signal
20
Machine-Head-Open Switch
120
inv Machine-Head-Open Switch
Actual Hardware Output Name
Actual Hardware Output Name
No.
Summary of Contents for Fortuna series
