13
E. Install the motor and fully loosen the fixing nuts
①
,
②
.
Then, tension is generated around the belt
④
due to the
weight of the motor
③
. Fasten the fixing nut
①
first and
tightly fasten the fixing nut
②
(KM-360-M).
②
①
②
③
②
①
①
④
③
4.4) Part Assembly
A. Attach the motor cover
①
to the rear side of the machine using the fixing screw
②
(However, in case of manual
trimming type, attach the belt cover (A)
①
, (B)
②
to the rear side of the machine using the fixing screw
③
).
B. Assemble the operating panel
①
to the bracket
②
, and
attach them to the rear side of the machine (KM-360J-
7M).
②
①
KM-360J-7E
KM-360J-7M
KM-360J-M
[Fig. 4]
[Fig. 5]
[Fig. 6]
[Fig. 7]