7
KM-360J series were designed as industrial sewing machines to conduct bottom hemming on
fabric and similar materials. Observe the following instructions during machine operation.
ⓐ
Read through this manual carefully and completely before operating the machine.
ⓑ
Wear proper clothes for work.
ⓒ
Keep hands or other parts of the body away from the machine’s operation parts(needle,
shuttle, thread take-up lever, pulley, etc.) when the machine is operating.
ⓓ
Keep the covers and finger guard on the machine during operation.
ⓔ
Be sure to connect the earthing conductor.
ⓕ
Turn off the main power and check if the switch is turned
“
off
”
before opening electric
boxes such as the control box.
ⓖ
Stop the machine before threading the needle or checking after work.
ⓗ
Do not step on the pedal when turning the power on.
ⓘ
If possible, install the machine away from source of strong electrical noise such as high
frequency welding machines
1.4) Operating
machine
Warning
Caution
[ Warning ]
Keep motor cover in place before operating, turn off power before inspecting or
adjusting.
1.5) Safety devices
ⓐ
Safety label : It describes cautions during the machine operation.
ⓑ
Thread take-up cover : It prevents any contact between body and take-up lever.
ⓒ
Motor cover : A device to prevent hands, feet and clothing from getting jammed by the
motor.
ⓓ
Label for specification of power : It describes cautions for safety to protect electric shock
during the motors’ rotation. (Voltage input / use Hz)
ⓔ
Finger guard : It prevent contacts between finger and needle.
ⓕ
,
ⓖ
Gear covers (left), (right) : They prevent fingers from contacting the conversion gear.
ⓒ
ⓐ
ⓑ
ⓕ
ⓖ
ⓓ
ⓔ