Aug 04
- 13 -
Form 44080000
Leak checking Gas line and cylinder connections
Step 1. Turn cylinder valve on by turning anti-clockwise.
Step 2. Check connections and valve for leaks. To check for leaks Spoon several drops of solution
onto the connections as illustrated.
Step 3. Inspect the solution for bubbles. If no bubbles appear then the connection is secure.
If Bubbles appear then there is a leak:
Turn OFF the cylinder valve.
Release the Regulator connection to the cylinder.
Re-attach the Regulator making sure the connection is tight.
Repeat the leak checking procedure described above.
If you continue to see bubbles after several attempts DO NOT use the heater. Contact Sunstar
heating products customer service at 704 372 3486 for assistance. DO NOT use the heater.