Aug 04
- 6 -
Form 44080000
3. You will need the following tools to assemble the heater: The tools are not included, but are
necessary for the proper assembly of your heater. Do NOT attempt to assemble without the correct
tools.
10mm AF Socket for brackets and wheel kit.
11mm AF or 7/16” Socket for Ballast Plate.
12mm Socket for Canopy
Standard Philips head #2 and #3 screwdrivers
Channel locks or pliers - minimum 1 ½” Capacity.
Adjustable Crescent wrench or socket driver
Soapy water solution for leak testing.
4. Lay the base down on its side to disassemble the burner from the base. Keep the nuts and washers
that are removed. They are used to secure the canopy.
5. With base on its side attach the 2 wheel assemblies.