35
G. Move to each point of the square by using
direction keys, then press PNT SET key
respectively to input coordinates of each edge
point. Whenever you press the PNT SET key,
the number on screen will be increased.
H. If you press EXE key, the machine operates
pattern data, then the feed plate moves
according to the operated data.
I. Press TRIM key to input the trimming code.
Then, “000:TRIM”appears on the screen for a
little while, and you can see the screen like
a figure on the right side.
J. If you press FORW and BACK keys to
progress and reverse 1 stitch, you can confirm
the real shape to be sewn. Whenever you once
press the keys, you can see the operating form
and coordinates at that time. If you want to
perform test sewing, goes to the next step
directly. If you press the keys without cease, a
needle moves to the beginning or ending point.
K. Press TEST key.
The upper feed plate moves to origin and to the
sewing start point, then goes up again. READY
LED lights up. Press SPEED key and adjust
the speed properly. Then if you step on the
pedal switch on the right side, the upper feed
plate comes to descend, and if you step on the
pedal switch on the left side, the machine starts
test sewing. If the test sewing is finished, the
upper feed plate moves to the sewing start
point, then comes to ascend.
L. Press TEST key one more time and finish the
test sewing. Then, the upper feed plate comes to
descend and moves to origin with the turning
off the READY LED.
M. Press WRITE key and input the number you
want to save by using digit keys, then press
ENTER key. (For example, if you want to
save a pattern number as 300, input [3][0][0].)
It you do that, the generated pattern data will
be saved in a floppy disk to that number.
During saving the pattern, the READY LED
flickers.
L I N E N O N E
X : - 0 6 5 0 A N : 0 0 1 9 3
Y : 0 0 3 0 0 A
F u n c t i o n C o d e ?
T R I M N O N E
X : - 0 6 5 0 A N : 0 0 1 9 4
Y : 0 0 3 0 0 A
F u n c t i o n C o d e ?
< T e s t S e w i n g >
S P : 1 2 0 0
O R I G I N
X : 0 0 0 0 0 A N : 0 0 0 0 0
Y : 0 0 0 0 0 A
F u n c t i o n C o d e ?
L I N E N O N E
X : - 0 6 5 0 A N : 0 0 1 9 3
Y : 0 0 3 0 0 A
F u n c t i o n C o d e ?
0 1 5 : P T R N W R I T E
N O : 3 0 0
0 0 7 : L I N E
X : - 0 6 5 0
Y : 0 0 3 0 0
N : 0 0 4
