82
Function No. : 016
Function Name : Setup for presser foot operation
Function No. : 017
Function Name : Setup for descent time of presser foot
It is to set the operation condition of presser foot.
It is to maintain the presser foot down all the time.
[ Contents ] The machine maintains the presser foot down all the time even not in
use.
016. PF Operation
1) ALWAYS_DN
Setting
Value
The presser foot is up except during sewing operation. (Factory installed condition)
[ Contents ] The machine goes down the presser foot just when the sewing operation
performs. When the sewing operation stops or finishes, the presser foot
goes up.
[ Ref. ] If you press 5 key, the presser foot goes down to make thread inserted.
2) SEW_DN
The machine goes down the presser foot in the progress or reverse of one stitch as well as
in the sewing operation.
[ Contents ] The presser foot goes down not only in the progress and reverse of one
stitch but during the sewing operation.
3) TRIAL_DN
It is to set the descent time of presser foot.
[ Caution ] This function is not available if Function No. 016. “Setup for presser
foot operation”sets as 1)ALWAYS_DN.
The presser foot goes down at the same time as main shaft turns.
(Factory installed condition)
[ Contents ] When the main shaft turns, the presser foot goes down simultaneously.
017. PF Down Mode
1) WITH_STRT
Setting
Value
The presser foot goes down at the same time as the upper feed plate descend.
[ Contents ] When the upper feed plate descends, the presser foot goes down
simultaneously.
2) WITH_FEED
