14
44
Installing the machine
1) Conditions for installing the machine
A. In order to prevent accident by malfunctioning, do not operate the machine in the place where rated voltage is more than
±
10%.
B. In order to prevent accident by malfunctioning, check if air pressure is proper at devices like air cylinder, before operating the
machine.
C. In order to use the machine safely, operate the machine under the following conditions.
⇒
The machine should be operating at : 0
°∼
40
℃
(32
°∼
104
℉
)
⇒
The machine should be stored at : -10
°∼
60
℃
(14
°∼
140
℉
)
D. Humidity: within 45 ~ 85% (relative humidity)
2) Conditions for power supply
A. Voltage
•
Voltage should be within 10 percent of the rated voltage.
•
Frequency should be within 1 percent of the rated frequency (50/60Hz).
B. Electromagnetic wave noise
It is required for the machine not to share power with products releasing strong magnetism and high frequency, and to keep the
machine away from them.
C. Make sure to use safe low voltage when it is needed to attach auxiliary devices or accessories to controller.
D. Be careful not to spill water or coffee on control box and Motor.
E. Do not fall control box and motor.
3) Assembling peripheral devices
A. Attach belt cover to the machine by using clamp screws.
[ Fig. 1 ]
