SunStar SPS/D-BH-6000 Series, User Manual

4

Contents

1. Safety Guideline

..............................................................................................................

6

1) Machine Transportation  ....................................................................................................... 6
2) Installation  ............................................................................................................................ 7
3) Operation  .............................................................................................................................. 7
4) Repair .................................................................................................................................... 8
5) Safety Devices ...................................................................................................................... 8
6) Locations of Warning Mark ................................................................................................ 9
7) Contents of Warning Mark .................................................................................................10

2. Specifications

................................................................................................................

11

3. Components of the Machine

.................................................................................

12

1) Name of Components ........................................................................................................ 12

4. Installation of the Machine

....................................................................................

13

1) Installation Environment .................................................................................................... 13
2) Electrical Environment  ...................................................................................................... 13
3) Placing the Machine on Top of the Table  ......................................................................... 14
4) Assembling Accessories  .................................................................................................... 14
5) Installing Pneumatic Parts  ................................................................................................. 15
6) Connecting Cables to Control Box .................................................................................... 17

5. Preparations before Operating the Machine

...............................................

19

1) Lubrication  ......................................................................................................................... 19
2) Attach Needles  ................................................................................................................... 20
3) Place Upper Thread ............................................................................................................ 21
4) Place Lower Thread  ........................................................................................................... 21
5) Place Inside Thread ............................................................................................................ 22
6) Adjust Thread Tension ....................................................................................................... 22
7) Adjust Sewing Margin  ....................................................................................................... 24
8) Handle Used Oil ................................................................................................................. 24

6. Maintenance and Repair

.........................................................................................

25

1) Adjust the Height of Spreader and Looper  ....................................................................... 25
2) Adjust the Timing of Needle and Looper .......................................................................... 26
3) Adjust Looper Stroke ......................................................................................................... 27
4) Adjust the Height of Needle Bar  ....................................................................................... 28
5) Adjust the Distance between Needle and Looper ............................................................. 28
6) Adjust Needle Guard .......................................................................................................... 29
7) Adjust the Position of Spreader  ......................................................................................... 29
8) Adjust Stitch Length  .......................................................................................................... 30
9) Adjust Cloth Opening  ........................................................................................................ 30
10) Replace Hammer .............................................................................................................. 31
11) Replace Cutter  .................................................................................................................. 31
12 Adjust Air Pressure  ........................................................................................................... 32
13) Adjust Upper Thread Trimming ...................................................................................... 32