47
Function No. : 098
Function Name : Design auto call
This function is to set the design auto call.
The design auto call is disabled (default).
[Contents] When it is not set, the sewing mode is NOR_SEW mode.
Design auto call setting
[Contents] When it is set, designs from #900 to #914 can be automatically called through
the external sensor input.
098. Auto Call
1) DISABLE
SAUT_BCODE setting
[Contents] Use the fixed type barcode to automatically call designs and move to the
barcode origin point after work is done.
4) SAUT_BCODE
Auto bar code setting
[Contents] Use the fixed type bar code to automatically call designs and make an auto
start.
5) AUTO_BCODE
2) ENABLE
Auto call setting with bar code
[Contents] It uses a bar code to automatically call designs and make the machine ready
for sewing.
3) BARCODE
Setting
Value
SFAT_BCODE setting
[Contents] Use the fixed type bar code to automatically call designs and make an auto
start. When work is done, it moves to the barcode origin point.
6) SFAT_BCODE
Function No. : 099
Function Name : Sewing ready setting upon design auto call
When designs are called automatically, it sets the use of sewing ready function.
The function is disabled.
[Contents] When designs are called automatically with the function unused, only designs are
called but the machine is not ready for sewing.
Sewing ready setting(default).
[Contents] It calls designs using the design auto call function and makes the machine
ready for sewing.
099. Auto Ready
1) DISABLE
2) ENABLE
Setting
Value
Auto call setting
[Contents] When the power blackout occurs all of a sudden, the design under work before
the blackout is automatically called, and the machine is ready for sewing.
3) AUTO_REAEDY
Setting of origin point auto call
[Contents] When the power is on, the automatic move to the latest barcode origin point
takes place.
4) AUTO_BCORG
Summary of Contents for SPS/E-5050 Series
Page 2: ......
