LIVE CIRCUIT
:
Use only with a Ground-Fault Circuit Interrupter - GFCI protected Outlet
with this grill.
VOLTAGE
:
Use only extension cords approved for outdoor use marked with W-A and
rated for the power of this appliance.
GRILL INSTALLATION – STEP BY STEP GUIDE
1. Mount Transformer
Using metal screws and attach the
transformer to the back inner wall of your
island’s cabinet wall, somewhere near the
already installed GFCI electrical outlet.
When you plug the transformer in, double
check the GFCI breaker switch, that the
outlet has power.
2. Elect. Connection
Locate the Light Button on Left side of grill
control panel. The Transformer's electrical
connection to grill is located behind control
panel, next to light button. The connection
clips together to form a secure connection.
Double check that all wires are tightly
pushed into plug sockets, so all wires make
proper connections. You can tuck wire into
body of grill or island frame.
PAGE 3
3. Gas Line Connection
See the BACK-RIGHT UNDER-SIDE – This is
where the Gas Line will connect to the Grill.
Grill is shipped as Liquid Propane ONLY and
includes a LP-Regulator for portable tank.
Recommendation to have an 18” hose to
allow grill to be pulled out if necessary. For
LP & NG Gas Installation, see page 10 thru 13
for complete instructions or call 888-934-
9449 for assistance.
