Introduction
Thank you for purchasing this quality product.
To minimize the risk of injury we urge that our cli-
ents take some basic safety precautions when using this device. Please read the operation in-
structions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety guidelines
BEWARE!
The use of this device is allowed on standing water bodies, garden ponds water or swimming ponds
and their surrounding areas only with fault current protection-switch with a triggering nominal current
up to 30 mA (according to VDE 0100 Article 702 and 738).
The device is not suitable for use in swimming pools, paddling pools and other water bodies in which
during operation there can be persons. The operation of the device during the stay of people in the
danger zone is not allowed. Ask your electrician.
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or have received instruction on the correct use of the device.
Children should be supervised to make sure that they do not play with the device.
ATTENTION!
Visually inspect the device before every use. Do not use the device if the safety appliances
are damaged or worn out. Never override safety regulations.
Use the device exclusively according to the intended purpose stated in the instructions for
use.
You are responsible for the safety of the working environment.
If the cable or the plug is damaged due to external influences the cable must not be repaired!
It has to be replaced with a new one. This work can be carried out only by an electrician.
The voltage indicated on the type plate of the device of 230 V AC has to correspond to the
existent mains voltage.
Never lift, carry or fixate the device by using the power cable.
Make sure that the electrical plug connection is placed in a flood-proof area and is protected
from moisture.
Before working on the pond pump disconnect the appliance by pulling the plug out of the
socket.
Avoid exposing the appliance to a direct water jet or rain.
The user is responsible for the compliance with location specific safety and installing
regulations. Ask an electrician.
Consequential damage arising from flooded rooms caused by dysfunctions of the appliance
must be avoided by means of the appropriate measures. {installing an alarm system, reserve
pump).
In case of malfunction the repair work can be carried out only by a qualified electricial.
The appliance must not run dry or with a completely closed intake port.
The appliance must not be used for swimming pools.
The device cannot be employed for potable water circuits.
WARNING
:
Read carefully all the safety guidelines and the instructions.
Non-compliance with the safety rules and regulations can lead to an electric shock, fire and/or serious
injury. Keep the instructions and the safety guidelines in a safe place in case you need them in the fu-
ture.
© by WilTec Wildanger Technik GmbH
Item 50328–50336
Page 3
http://www.WilTec.de
http://www.aoyue.eu
11 2020
-1
