© by WilTec Wildanger Technik GmbH
Item 55557
–55560
Page 3
06 2021
-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Warning!
Read the manual and familiarize yourself with the device before using it. The correct and safe use of
the system requires the absolute compliance with the safety instructions. Children and young people
under the age of 16 as well as users not able to be aware of potential hazards or not sufficiently familiar
with this manual are not allowed to use this device.
Features
•
This elaborate and compact product allows for filtering, clarifying, and pumping water, building
up a culture of biochemical bacteria, and fulfilling other functions in one single device.
•
Large filtering area, suitable water flow conduct with amazing efficiency
•
Filter material box integrated and independent, allowing for a simple replacing and adding dif-
ferent biochemical filter material
•
Filtering media (no. 11, 12, and 13 on the exploded view) separately available and stackable to
stretch the maintenance cycle
•
Suitable for ponds
Safety instructions
Attention!
The CUF series product are combinable UVC clarifying devices. They comprise a water
pump and a UV-C lamp. Every damage to the device and every incorrect use of it lead to dangerous
radiation getting in contact with skin and eyes. The device being damaged, it must not be used any
longer. This device is not intended to be used by persons (including children) with reduced physical or
mental abilities or with a lack of experience and knowledge, unless they be supervised and/or instructed
by a person responsible
for their safety. The device should be placed out of children’s reach.
•
This device must be placed in the water. Make sure that the device is completely immerged in
the water at a spot whose depth does not exceed 2 m.
•
If there is not enough water to completely immerge the device, never plug in the plug; thus, you
avoid dry running (operation without water) and damages to the device.
•
For the UVC lamp is made of fragile quartz crystal glass, avoid dropping or tapping the device.
•
Before all parts are completely assembled, the device must not be plugged in.
•
If the power cable, the UVC lamp, or the housing is damaged, the device must not be operated.
•
Make sure that the existing mains voltage and frequency match the specifications on the name-
plate of the device.
•
When installing the device, you have to respect the installation regulations for pond pumps.
•
The device must be earthed. The earthing should be controlled by a qualified electrician. For
safety reasons, we recommend installing a leakage protection.
•
Do not pull out the plug by pulling the power cable. Keep the cable away from heat, oil, or sharp
edges.
•
If the pump makes unusual noises, disconnect it from the mains and try to find the reason.
•
With frost danger, remove the UVC filter to avoid frost damages.
•
A dirty quartz crystal glass tube affects the efficiency of the device; thus, regularly and timely
clean the quartz crystal glass tube.
•
If the housing of the device is clogged with sand or other deposits, the quartz crystal glass tube
and water pump might be damaged. Therefore, put the filter sponge into the water outlet. The
filter sponge must regularly be cleaned (once a month).
