19
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
INSTALLATION and OPERATION MANUAL
Menu
On/Off
Micro USB
Navigati on
butt ons
Screen/
Display
During the operation of the burner, the
operation of both augers and the fan is
depicted with animated pictures of
their respective place. When a fire is lit,
a flame will appear in the boiler. If there
is a need to display several messages on
the bottom line, they alternate every 4
seconds.
The date is displayed in white, the
operating phase in green and the
registered errors in red. If the watch has
not been adjusted, its reading will be -: -.
You will need to adjust the clock for the
burner to work properly.
9.2. LCD Screen. Explanation of the
display indication:
After turning on the power, the controller
displays its main screen, which has the
following view:
In most cases, when there are error
messages displayed in red on the bottom
line, a warning three-tone beep will
sound
Some of the error messages are cleared
automatically after the reason that led to
their registration disappears. There are
other messages such as "back-burning",
"frozen boiler", etc., which can be cleared
only by pressing and holding the button
for more than 2 seconds.
Ribbon with icons
for the status of the
outputs and Inter-
net connecti on
Informati on fi elds
- selecti on of the
displayed informa-
ti on
Clock
Boiler water
temperature
Acti ve forced
STOP / input OD /
Heater included
Main fan speed
Field “Fuel number” -
currently used
Date, burner
operati ng phase
or error message
