TECHNICAL PASSPORT INSTALLATION and OPERATION MANUAL
11 - EN
- Start pouring the anti-freezing and anti-corrosive brine in the system using the venting upper point
of the system or other appropriate method. A good air venting of the system is critical for any solar
installation.
- Check again inclination and tightness of the system.
14.
Warranty terms.
Failure to observe the installation and operating requirements described in the manual
and the service booklet voids the warranty.
14.1.
Manufacturing defects and materials guarantee
The manufacturer expressly guarantees that the products it manufactures shall be free from defects
in materials and workmanship which can prevent from normal operation under proper and normal
use, installation and maintenance for the intended functions of the products for a period set out in
the warranty certificate of the respective model of the collector you have bought.
The warranty period begins from the date indicated in the purchase invoice. If a product or any
component thereof is determined to be defective in manufacture or materials, manufacturer will
repair or replace the defective component or product.
14.2. Exclusions and Limitations of Warranty Coverage
14.2.1. The customer can claim warranty during warranty period of respective product immediately
after any defects have been determined, except for in case of noticeable defects at the moment of
purchase, in which case the customer must make the claim at the shop immediately after noticing
the defect, as it is provided for in the general conditions of sale.
14.2.2. This warranty certificate is considered void in cases when defects and errors in functioning of
products are caused by:
-
Accidents as a result of improper storage, transportation, unsuitable or incorrect use.
-
Failure to observe the installation, use, and maintenance instructions set forth in the
installation manual of respective product.
- Improper installation or use as well as changes especially if they are not made by authorized after-
sale service personnel of manufacturer.
- Testing and operation pressures greater than the values established by manufacturer and set forth
in product manuals.
Freeze, flood, natural disasters or third party actions as well as any interventions into normal
functioning conditions of collectors and the control of manufacturer.
14.2.3. The warranty certificate is considered void as well for collectors whose serial identification
number has been modified, removed or blurred, or cannot be expressly attested.
14.2.4. Damages in the appearance of products shall not be considered as defects giving right for
laying claim except for those ones which cause problems in functioning or change technical
characteristics of collectors.
14.2.5. The manufacturer preserves the right, in case of replacement, to deliver another model of
collector in order to fulfill approved warranty claims in case the original model is not being
manufactured.
