9
Safety check before use
When unfolding/folding your eFOLDi Lite ensure:
The eFOLDi is positioned on a level floor or ground,
Main switch is switched off.
All latch pins are properly secured in place, as stated on the instructions and shown on the
illustrations.
It is highly recommended that you perform a safety check before each use to make sure your
eFOLDi operates smoothly and safely.
Check
for correct tyre inflation. Maintain but do not exceed the PSI/BAR/kPa air pressure
rating indicated on the pneumatic rear tyres and be sure to use the correct pressure scale and
according number on your inflator/taster.
Check
all electrical connections. Make sure they are secure and not corroded.
Check
and test the brake system.
Check
frequently for any loose fasteners, fixings and other components.
CAUTION
DO NOT
for any reason put your hands into the
main red frame of the eFOLDi Lite, especially in
the last step of the folding process. This is because
your hands and fingers can get trapped in the
main levers and pivots and serious injuries can be
caused.
DO NOT RUSH WHEN FOLDING OR UNFOLDING
THE eFOLDi Lite.
!
Safety guidance
Summary of Contents for eFOLDi Lite
Page 1: ...1 eFOLDi Lite USER MANUAL ...
Page 7: ...5 ...